DEI® Clever Easyflow
DEI® Clever Easyflow is a micro-hybrid flowable light curing composite. It’s a very much aesthetic compound, recommended for III and V classes restaurations, erosions, and for I and II classes as a material of integration of cavity bases (sandwich technique).
• Indicated for restorations of V and III classes
• Very helpful in I and II classes in sandwich technique
• Best flowable consistency
• Very good adaptation in cavitary bottons
• Stable without dripping in applications on V classes or erosions
• Highly radiopaque
• High percentage of filler (61% on weight)
• Best aesthetic performances
• Low water absorption (colour stability)
• Complies with ISO 4049 regulations
• Releases fluorine
DEI® Clever Easyflow is highly radiopaque and much filled, therefore offering peculiar features of resistance to mastication and erosion. Also the values of water absorption are very reduced, with advantages as to colour stability.
DEI® Clever Incisal Flow:
It is a composite studied for definitive sealing of inside characterizations. It shows up opaque before photo-polymerization for control of the depth; after photoactivation it becomes translucent.
Advantages:
High percentage of filler (61% on weight)
Low water absorption (colour stability)
Best aesthetic performances
Stable without dripping
Technical data:
Particle size 0,05-1.0 μm
Total filler content (by weight) 61%
Maximum depth of cure 2,9 mm
Working time (light exposure) 90”
Curing time - clear colours 20”
Linear polymerization shrinkage 0.9 %
Compressive strength 320 MPa
Flexural strength 130 MPa
Water sorption 20 μg/mm³
Water solubility 5 μg/mm³
DEI® Clever Easyflow Blue :
It is indicated for the first layer in aesthetic restoration, the first composite layer under temporary splinting, root canal mark, temporary occlusion correction, temporary correction of contact point.
Advantages:
Best flowable consistency
Very good adaptation in cavitary bottons
Highly radiopaque
Stable without dripping
High percentage of filler (64% on weight)
Low water absorption (colour stability)
Releases fluorine
Complies with ISO 4049 regulations
Technical data :
Particle size 0,9 μm
Total filler content (by weight) 64%
Maximum depth of cure 2,5 mm
Working time (light exposure)120”
Curing time - clear colours 40”
Linear polymerization shrinkage 1-1,3%
Compressive strength 303 MPa
Flexural strength 105,20 MPa
Water sorption19,45 μg/mm3
Water solubility 0,89 μg/mm3
| Dimension (L x W x H) | 0 x 0 x 0 |
| Weight | 0 |
Returns & Refunds text test az
Çatdırılma 3 üsulla həyata keçirilir:
1. Çatdırılma (24 saat ərzində) (0.00 AZN)2. Expres çatdırılma (Sumqayıt) (5.00 AZN)3. Expres çatdırılma (Bakı və ətraf ərazilər) (10.00 AZN)
Ödəniş yalnız nağdsız qayda da aparılır. 2 üsulla həyata keçirilir:
1. Sayt üzərindən kartla ödəniş2. POS terminal vasitəsi ilə yerində ödəniş